Black plate (19,1)Cadillac CTS Owner Manual (GMNA-Localizing-MidEast-6882317) - 2014 -CRC - 9/19/13Driving and Operating 9-19Ignition PositionsThe vehicle has an electronickeyless ignition with pushbuttonstart.Pressing the button cycles it throughthree modes: ACC/ACCESSORY,ON/RUN/START, and Stopping theEngine/OFF.The Remote Keyless Entry (RKE)transmitter must be in the vehicle forthe system to operate. If thepushbutton start is not working, thevehicle may be near a strong radioantenna signal causing interferenceto the Keyless Access system. SeeRemote Keyless Entry (RKE)System Operation on page 2-3.To shift out of P (Park), the vehiclemust be in ACC/ACCESSORY orON/RUN, and the brake pedal mustbe applied.Stopping the Engine/OFF (NoIndicator Lights): When thevehicle is stopped, press theENGINE START/STOP button onceto turn the engine off.If the vehicle is in P (Park), theignition will turn off, and RetainedAccessory Power (RAP) will remainactive. See Retained AccessoryPower (RAP) on page 9-23.If the vehicle is not in P (Park), theignition will return to ACC/ACCESSORY and display amessage in the Driver InformationCenter (DIC). See TransmissionMessages on page 5-57. When thevehicle is shifted into P (Park), theignition system will switch to OFF.