Black plate (24,1)Cadillac CTS Owner Manual (GMNA-Localizing-MidEast-6882317) - 2014 -CRC - 9/19/139-24 Driving and OperatingShifting Into ParkUse this procedure to shift intoP (Park):1. Hold the brake pedal down andset the parking brake.See Electric Parking Brake onpage 9-34.2. Move the shift lever into P (Park)by holding in the button on theshift lever and pushing the leverall the way toward the front ofthe vehicle.3. Turn the ignition off.4. Take the Remote Keyless Entry(RKE) transmitter with you.Leaving the Vehicle with theEngine Running{ WarningIt can be dangerous to leave thevehicle with the engine running.It could overheat and catch fire.It is dangerous to get out of thevehicle if the shift lever is not fullyin P (Park) with the parking brakefirmly set. The vehicle can roll.Do not leave the vehicle when theengine is running. If you have leftthe engine running, the vehiclecan move suddenly. You or otherscould be injured. To be sure the(Continued)Warning (Continued)vehicle will not move, even whenyou are on fairly level ground,always set the parking brake andmove the shift lever to P (Park).See Shifting Into Park onpage 9-24. If you are towing atrailer, see Driving Characteristicsand Towing Tips on page 9-81.If you have to leave the vehicle withthe engine running, the vehicle mustbe in P (Park) and the parking brakeset. After shifting into P (Park), try tomove the shift lever out without firstpushing the button on the shift lever.If you can, the shift lever was notfully locked into P (Park).