Black plate (68,1)Cadillac CTS Owner Manual (GMNA-Localizing-MidEast-6882317) - 2014 -CRC - 9/19/139-68 Driving and OperatingWithout Adaptive Cruise ControlThe Collision Alert control is on thesteering wheel. Press 3 or [ toset the FCA timing to Far, Medium,Near, or on some vehicles, Off. Thefirst button press shows the currentsetting on the DIC. Additional buttonpresses will change this setting. Thechosen setting will remain until it ischanged and will affect the timing ofboth the Collision Alert and theTailgating Alert features. The timingof both alerts will vary based onvehicle speed. The faster thevehicle speed, the farther away thealert will occur. Consider traffic andweather conditions when selectingthe alert timing. The range ofselectable alert timing may not beappropriate for all drivers anddriving conditions.If your vehicle is equipped withAdaptive Cruise Control (ACC),changing the FCA timing settingautomatically changes the followinggap setting (Far, Medium, or Near).Unnecessary AlertsFCA may provide unnecessaryalerts for turning vehicles, vehiclesin other lanes, objects that are notvehicles, or shadows. These alertsare normal operation and thevehicle does not need service.Cleaning the SystemIf the FCA system does not seem tooperate properly, cleaning theoutside of the windshield in front ofthe camera sensor on the back ofthe rearview mirror, and cleaning thefront of the vehicle where radarsensors are located, may correctthe issue.
