Finding a StationBAND: Press this button to switch between FM1, FM2,AM, or XM1 or XM2 (48 contiguous US states, ifequipped). The display will show your selection.TUNE: Turn this knob to select radio stations.q SEEK r: Press the right or the left arrow to go tothe next or to the previous station and stay there.The radio will seek only to stations that are in theselected band and only to those with a strong signal.q SCAN r: Press and hold either arrow formore than two seconds. SCAN will appear on thedisplay and you will hear a beep. The radio will go to astation, play for a few seconds, then go on to thenext station. Press either arrow again to stop scanning.To scan preset stations, press and hold either arrowfor more than four seconds. PSCN will appear onthe display and you will hear two beeps. The radio willgo to the first preset station, play for a few seconds,then go on to the next preset station. Press either arrowagain or one of the pushbuttons to stop scanning.The radio will scan only to stations that are in theselected band and only to those with a strong signal.Setting Preset StationsThe six numbered pushbuttons let you return to yourfavorite stations. You can set up to 30 stations (six FM1,six FM2, and six AM, or six XM1 and six XM2 (48contiguous US states, if equipped), by performing thefollowing steps:1. Turn the radio on.2. Press BAND to select FM1, FM2, AM, or XM1or XM2.3. Tune in the desired station.4. Press AUTO EQ to select the equalization.5. Press and hold one of the six numberedpushbuttons. The radio will produce one beep.Whenever you press that numbered pushbutton, thestation you set will return and the equalizationthat you selected will be automatically stored forthat pushbutton.6. Repeat the steps for each pushbutton.3-68
