To adjust the fade between the front and the rearspeakers, push and release the AUDIO knob until FADEappears on the display. Turn the knob to move thesound toward the front or the rear speakers.To adjust the balance and fade to the middle position,push the AUDIO knob then push it again and hold it untilthe radio produces one beep. The balance and fadewill be adjusted to the middle position and the displaywill show the speaker balance.To adjust all tone and speaker controls to the middleposition, push and hold the AUDIO knob when no toneor speaker control is displayed. ALL will appear onthe display, you will hear a beep and the display levelwill be adjusted to the middle position.Finding a Program Type (PTY) Station(RDS and XM™)To select and find a desired PTY perform the following:1. Turn the P-TYPE knob to activate program typeselect mode. TYPE and a PTY will appear on thedisplay.2. Turn the P-TYPE knob to select a PTY.3. Once the desired PTY is displayed, press theSEEK TYPE button or one of the SEEK arrowsto take you to the PTY’s first station.4. If you want to go to another station within that PTYand the PTY is displayed, press the SEEK TYPEbutton once. If the PTY is not displayed, pressthe SEEK TYPE button twice to display the PTY andthen to go to another station.5. Press the P-TYPE knob to exit program typeselect mode.If PTY times out and is no longer on the display, goback to Step 1.If both PTY and TRAF are on, the radio will search forstations with the selected PTY and trafficannouncements.If the radio cannot find the desired program type, NONEwill appear on the display and the radio will return tothe last station you were listening to.SCAN: You can scan the stations within a PTY byperforming the following:1. Turn the P-TYPE knob to activate program typeselect mode. TYPE and a PTY will appear on thedisplay.2. Turn the P-TYPE knob to select a PTY.3-70
