Black plate (4,1)Cadillac 2015i Escalade Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-8431501) - 2015 - crc - 8/1/144-4 StorageTo return the cover to the retractedposition:1. Pull up on the cover handle torelease the cover posts from theretaining sockets.2. Let the cover move forward tothe full retracted position.To remove the cover:1. Let the cover go all the way intothe holder.2. Then, grasping the driver sidecover end cap, push the coverend cap toward the passengerside of the vehicle.3. Swing the cover rearward andtake it out of the vehicle.To put the cover in the vehicle:1. Make sure the cover slot in theholder faces rearward with theround surface facing down.2. Then, hold the cover at an angleand place the cover end cap intothe slot in the passenger sidetrim panel.3. Move the other end of the coverforward and hold it next to thedriver side trim panel slot.4. Press the end caps in, to allowthe cover to fit into the trim slot.5. Pull lightly on the cover holder tomake sure it is secure.On long wheelbase models thereare two cover positions. The slotsfurthest forward allow the cover tobe used if the third seat is removedor folded down. The cover can beinstalled and removed fromeither side.Roof Rack System{ WarningIf something is carried on top ofthe vehicle that is longer or widerthan the roof rack — like paneling,plywood, or a mattress — thewind can catch it while the vehicleis being driven. The item beingcarried could be violently torn off,and this could cause a collisionand damage the vehicle. Nevercarry something longer or widerthan the roof rack on top of thevehicle unless using a GMcertified accessory carrier.If equipped, the roof rack can beused to load items. For roof racksthat do not have crossrails included,GM Certified crossrails can bepurchased as an accessory. Seeyour dealer for additionalinformation.
