Black plate (27,1)Cadillac 2015i Escalade Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-8431501) - 2015 - crc - 8/1/14Seats and Restraints 3-27Safety System CheckNow and then, check that the safetybelt reminder light, safety belts,buckles, latch plates, retractors, andanchorages are all working properly.Look for any other loose ordamaged safety belt system partsthat might keep a safety belt systemfrom doing its job. See your dealerto have it repaired. Torn or frayedsafety belts may not protect you in acrash. They can rip apart underimpact forces. If a belt is torn orfrayed, get a new one right away.Make sure the safety belt reminderlight is working. See Safety BeltReminders on page 5-16.Keep safety belts clean and dry.See Safety Belt Care on page 3-27.Safety Belt CareKeep belts clean and dry.{ WarningDo not bleach or dye safety belts.It may severely weaken them. Ina crash, they might not be able toprovide adequate protection.Clean safety belts only with mildsoap and lukewarm water.Replacing Safety BeltSystem Parts after aCrash{ WarningA crash can damage the safetybelt system in the vehicle.A damaged safety belt systemmay not properly protect theperson using it, resulting inserious injury or even death in acrash. To help make sure thesafety belt systems are workingproperly after a crash, have them(Continued)Warning (Continued)inspected and any necessaryreplacements made as soon aspossible.After a minor crash, replacement ofsafety belts may not be necessary.But the safety belt assemblies thatwere used during any crash mayhave been stressed or damaged.See your dealer to have the safetybelt assemblies inspected orreplaced.New parts and repairs may benecessary even if the safety beltsystem was not being used at thetime of the crash.Have the safety belt pretensionerschecked if the vehicle has been in acrash, or if the airbag readiness lightstays on after you start the vehicleor while you are driving. See AirbagReadiness Light on page 5-16.
