Black plate (57,1)Cadillac 2015i Escalade Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-8431501) - 2015 - crc - 8/1/14Instruments and Controls 5-57enough for the Universal Remotesystem to pick up the signal duringprogramming.If the programming did not work,replace Step 2 under “Programmingthe Universal Remote System” withthe following:Press and hold the UniversalRemote system button whilepressing and releasing thehand-held transmitter button everytwo seconds until the signal hasbeen successfully accepted by theUniversal Remote system. TheUniversal Remote system indicatorlight will flash slowly at first and thenrapidly. Proceed with Step 3 under“Programming the Universal RemoteSystem” to complete.Universal Remote SystemOperationUsing the Universal RemoteSystemPress and hold the appropriateUniversal Remote system button forat least one-half second. Theindicator light will come on while thesignal is being transmitted.Erasing Universal RemoteSystem ButtonsErase all programmed buttons whenvehicle ownership is terminated.To erase:1. Press and hold the two outsidebuttons until the indicator lightbegins to flash. This should takeabout 10 seconds.2. Release both buttons.Reprogramming a SingleUniversal Remote SystemButtonTo reprogram any of the systembuttons:1. Press and hold any one of thebuttons. Do not release thebutton.2. The indicator light will begin toflash after 20 seconds. Withoutreleasing the button, proceedwith Step 1 under “Programmingthe Universal Remote System.”
