CalAmp Fusion LTE User Manual

CalAmp Fusion LTE User Manual Manual pdf 33 page image

33IP Address: Same as previous sectionWiFi Status: When status is listed as N/A, the interface is disabled; when status is listed as Ready: Interface is ready toaccept clients.3.5.2 WIRELESS SETTINGS• Interface: Enabled or Disabled• SSID: The SSID is the name of the wireless local network. All devices connecting to the Fusion WiFi access pointmust have the same SSID. Check the “hide” box to prevent the WiFi Access Point from transmitting the SSID. Thiswill improve the security of the device.• Channel: Select the WiFi channel the module will transmit on. If there are other WiFi devices in the area theFusion should be set to a different channel than the other access points.• Authentication: Select authentication method, options are Shared; WPA-PSK and WPA-PSK2. WPA-PSK2 is therecommended setting if security is required.• Encryption: Select encryption method, options are None, WEP, TKIP, or CCMP. Depending on the authenticationmethod selected, some options will not be available here.• WEP Key Length: Choose 64 or 128 bit key. This is only available if the WEP option is selected for encryption.3.5.3 IP SETTINGS