Caliber RCD 235BTi Manual
                            | |
Contents
| 
RCD 235BTi • ManualINSTALLING THE UNITPackage will include in the following accessories for installation and operation of the unitTake out screwbefore installation.• Detach the mounting sleeve (D) and frame (B) from the unit housing. Use the assembly keys (C) to do so.• Fit the mounting sleeve into the ISO dashboard slot.• Bend the mounting sleeve tabs over with a screwdriver so that the frame is mounted securely in thedashboard slot.• Check that the frame is secure.• Connect the ISO connection of the unit to the two ISOconnectors of your vehicle• Connect the antenna cable of the vehicle antenna to theantenna adapter of the unit.• If necessary, also secure your unit against theft. Fastenthe screws to the mounting bracket and to themounting material on the engine firewall of the car.• Slide the unit carefully into the mounting sleeve, until itclicks into place.• After all connections have been made, press the RESETbutton using a ballpoint pen or other pointed object.• Attach the control panel (A), as described under “Attach control panel“.Caution:Possible damage to the cables!-> When inserting the unit, pay attention to the cable routing to prevent damage.-> Then mount the frame. |
Related manuals for Caliber RCD 235BTi
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine