13HOW TO CLEAN THE FILTERCleaning the Lint FilterCleaning the water inlet filter• Clean the filter when water leaks from the water inlet.Cleaning the drain filter• In case “Pump-Model” drain hose, this filter’s equipped at the back side of washer.• This drain filter is to screen the foreign stuffs such as threads, coins, pins, buttons, etc.• If the drain filter is not cleaned at proper time (every 10 times of use), Drain problem could becaused.1 Pull the Fiter frame up-ward.2 Turn the lint filter insideout, wash to the lint offwith water.3 Return the filter as it was,and insert the filter frameinto the slot.1 Pull the powerplug out beforecleaning it.2 Turn off the watersupply to thewasher andseperate the inlethose.3 Pull the inlet filterout.4 Remove the dirtfrom the inlet filterwith a brush.Lint Filter Filter Frame1 Put down the remainedwater in the hose. Andput a container under thefilter to collect water.2 Turn the cap counterclockwise.3 Pull out the filterassembly off the case.4 Clean the drain filterremoving the foreignstuffs.5 Put the filter into thecase. And turn the cap toadjust the prominence ofthe filter to the hole of thecase.6 Turn the cap clockwisetightly.FILTERFILTERFILTERCAPCAPCAPCAPCAPCASECASESTOPPERSTOPPERCONTAINER