Campomatic TK15's Instruction Manual

Contents

Campomatic TK15's Instruction Manual Manual pdf 6 page image

6INLET HOSE CONNECTION1 Pull down the collar ofthe inlet hose to separateit from the water tapadapter.2 Loosen the four screwsproperly in fitting intowater tap.3 Fit the water tap adapterinto the water tap andtighten the four screwsevenly while pushing upthe adapter so that therubber packing canattach to the water taptightly.1 Connect the inlet hose tothe water tap byscrewing the connectortightly.2 Connect the connector-inlet supplied ifnecessary.3 Insert the inlet hoseadapter into the waterinlet of a washingmachine and turn it to befixed. .4 Remove the tape, andscrew connector B intoconnector A tightly.5 Connect the inlet hose tothe water tap adapter bypulling down the collar ofthe hose end.6 Connect the inlet hoseadapter of the hose tothe water inlet of thewashing machine byturning it clockwise to befixed tightly.Be careful not to confuse hot water inlet and cold water inlet.In using only one water tap or in case of attached one water inlet valve, connect theinlet hose to the cold water inlet valve.For Ordinary TapFor Screw-Shaped Tap• Please check the rubberpacking inside the inlet hoseadapter of the hose.* Check the packing in the inletConnector BConnector AConnectorHose ConnectorRubberPackingConnectorinletConnectorHose ConnectorRubberPackingTAPE