73CANNON® Mini-Rotary Viscometer CMRV-5000 Instruction & Operation ManualVersion 1.0b—August, 2011; CANNON® Instrument Company2139 High Tech Road • State College, PA • 16803 • USASorting analysis dataAfter you have displayed an analysis, you may sort alphanumerically byany of the table headings (the default sort for most reports is TimeStamp). To sort, simply click on the desired column heading. The tablewill be displayed with the new sort order.NOTE The Sort function is only available for an analysis when the DynamicUpdate mode option is NOT selected. To restore sort functionality for ananalysis, reconfigure the analysis by clicking Configure Analysis from theAnalyses menu. Then access the Date filter options for the analysis andclick the Use Fixed Date and Time radio button . Set the Date/Timeparameters and click OK to create the new analysis.Using the date filterUse the date filter to select date/time parameters for the analysis. To usethe date filter, click the Date Filter tab from the analysis configurationwindow.To define a Fixed Date and Time, click the corresponding radio button. Then use the spin controls and/or list box selection options to setthe appropriate date/time parameters. All samples tested after the startdate/time and before the end date/time, inclusive, will be included.To automatically update the report with sample data as tests are com-pleted, click the Use Dynamic Update radio button. Click the Do not
