Cannon CMRV-5000 Instruction & Operation Manual

Contents

Cannon CMRV-5000 Instruction & Operation Manual Manual pdf 83 page image

75CANNON® Mini-Rotary Viscometer CMRV-5000 Instruction & Operation ManualVersion 1.0b—August, 2011; CANNON® Instrument Company2139 High Tech Road • State College, PA • 16803 • USAnames/instruments from the list boxes and add them to the analysis, holddown the C key while clicking on each desired profile/instrument.To filter by Sample ID characteristics, place the pointer/cursor in theSample ID field and type the desired sample IDs, or leave the field blankto include all sample IDs for the selected instruments. You may usewildcards (%,_) to select a range of samples. For example, S% wouldinclude data from all samples starting with S. %S% would include datafrom all samples containing S. The underscore (_) is a single-characterwildcard. You may use multiple IDs separated by a comma. For ex-ample, CL%,MRV% would display all samples beginning with CL orMRV.NOTE If no instruments/profile names/Sample IDs are selected, the analysis willdisplay data for ALL instruments/profiles/Sample IDs.Using the report/port output filterUse the Report or Port Output filter to determine which data will becalculated and/or included in the analysis, and/or in what sequence thatdata will be displayed. Report/Port Output filter options will vary depend-ing on the nature of the analysis. For more information on Report/PortOutput filter options, please see the chapter on the specific analysis.Reconfiguring a displayed analysisAn on-screen analysis may be reconfigured using the same filtering toolsavailable when creating a new configuration. To access configurationoptions for a displayed analysis:1. Select Analyses from the VISCPRO® primary menu options.2. Select Configure Analysis from the Analyses options.3. Select the desired analysis from the available analyses. The SampleAnalysis Configuration window will appear.4. Reconfigure the analysis as desired by clicking the tabs to access theDate, Sample and Report filtering options (see previous sections).When done, click OK.5. You will be prompted to save the new analysis configuration. Afteryou make your selection(s), the analysis will be performed anddisplayed using the new configuration settings.