Cannon PROFESSIONAL 1000 Use And Installation Instructions

Also see for Professional 1000: Use and Installation Instructions Use and Installation Instructions Use and Installation Instructions Use and Installation Instructions Instruction manual

Contents

23! Never use steam cleaners or pressure cleaners on the appliance.! Clean the glass part of the oven door using a sponge and a non-abrasive cleaning product, then dry thoroughly witha soft cloth. Do not use rough abrasive material or sharp metal scrapers as these could scratch the surface andcause the glass to crack.! The accessories can be washed like averyday crockery (even in your dishwasher).! Switch off the electricity supply and allow to cool before cleaning the cooker.! Clean the cooker regularly and wipe up spills soon after they occur to prevent them from becomingburnt on. Never use biological washing powder, caustic cleaners, harsh abrasives, scouring pads,steam cleaners, aerosol cleaners or oven chemical cleaners of any kind.! Before moving your cooker ensure that it is cool and note that it is heavy so you may requireassistance. The cooker is fitted with rear wheels and will slide in and out of position easily.Movement of your cooker is most easily achieved as follows:Open the grill/oven door sufficiently to allow a comfortable grip on the underside front edge of the ovenroof, avoiding contact with any grill or oven furniture and then lift and slide at the same time.When repositioning the cooker, ensure that it is level. Take care to ensure that any floor covering is notdamaged.'HEAT CLEAN' LINERSThe oven linings are coated with a special enamel which has a continuous cleaning action. The higher the oventemperature the more effective the action. In most cases this cleaning operation will proceed during normalcooking.However, if high temperatures are not used regularly it may be necessary to run the oven empty at maximumsetting for one hour. If desired, they can be wiped over with a soapy cloth followed by a wipe with a clean,damp cloth.CLEANING THE GRIDDLE PLATEAfter cooking, leave the griddle plate on the hob and allow to cool before cleaning. It can then be taken to thesink and washed using warm soapy water, gently wipe the cooking surface with a dishcloth. DO NOT useabrasive cleaning materials.REPLACEMENT O2 OVEN LIGHT BULBCAUTION: DISCONNECT THE APPLIANCE 2ROM THE ELECTRICITY SUPPLY BE2OREREPLACING THE LAMP TO AVOID THE POSSIBILITY O2 AN ELECTRIC SHOCK.Light bulbs are not covered by the manufacturer's guarantee.A new 15W, 300°C rated SES bulb can be obtained from your cooker supplier or any major electrical retailer.1. Remove the shelves from the oven.2. Unscrew the lens using a thick cloth to protect your fingers in the unlikely event of a lens fracture.3. Unscrew bulb.4. 6it new bulb and refit lens.CARE AND CLEANINGAll manuals and user guides at all-guides.com