Cannon Professional 60 User Instructions

Also see for Professional 60: Use and Installation Instructions Use and Installation Instructions

27CARE AND CLEANINGWARNING: BEFORE CLEANING, SWITCH THE COOKER OFF AT THE MAINS COOKERCONTROL PANEL AND ALLOW IT TO COOL. IT IS ESSENTIAL THAT THE OVENS ARECLEANED AND KEPT FREE FROM FATS, OIL AND GREASE.! Never use steam cleaners or pressure cleaners on the appliance.! Clean the glass part of the oven door using a sponge and a non-abrasive cleaningproduct, then dry thoroughly with a soft cloth. Do not use rough abrasive material orsharp metal scrapers as these could scratch the surface and cause the glass tocrack.! The accessories can be washed like averyday crockery (even in your dishwasher).'Heat Clean' Liners'Heat Clean' liners are covered with a special enamel which absorbs cooking soils. Athigher temperatures the soiling is slowly destroyed. In most cases normal cooking athigher temperatures will permit this cleaning to take place automatically.However, if higher cooking temperatures are not used regularly then it may benecessary, in order to prevent heavy soiling, to run the oven at maximum temperaturefor at least two hours, from time to time.The 'Heat Clean' liners can be washed in warm soapy water followed by rinsing in clearwater. Dry well with a soft cloth.NOTE: Do not use enzyme washing powder, harsh abrasives or chemical ovencleaners of any kind.Oven FittingsThe oven shelves can be cleaned either in a dishwasher or by using a fine steel woolsoap pad. The grill and meat pans can be cleaned in warm soapy water using a finesteel wool soap pad to remove stubborn stains or in a dishwasher.They should be cleaned after each use.Oven InteriorsTo clean the oven interiors remove all the oven fittings and where applicable the 'HeatClean' liners.All types of oven cleaners can be used, but do not allow abrasive cleaners or ovenspray to come into contact with the 'Heat Clean' liners.Use a fine steel wool soap pad to remove stubborn stains.Oven Door CleaningThe inner door glass panel can be removed for easy cleaning, see CLEANING THEDOORS section of Care and Cleaning.Hotplate, Burner Caps and Pan SupportsTo clean, use a cloth wrung out in soapy water. Stubborn stains can be removed witha cream paste, liquid cleaner or by rubbing with fine steel wool soap pads.NOTE: Check that the cleaning agent is approved by the Vitreous EnamelAssociation.Hotplate Burner BodiesUse a nylon brush to remove any cleaning materials, water or dirt from the hotplateburner bodies.