Canon 0585C006 Instruction Manual

88>: Setting Personal FunctionsP.Fn-07: I (Flash firing during linked shooting)When performing linked shooting function (p.67), you can set whether ornot to fire the flash attached to the camera. Set it on each flash to be usedin linked shooting. P.Fn-07 is not displayed on the Speedlite 430EX III.0: OFF (Disabled)The flash does not fire during linked shooting.1: ON (Enabled)The flash fires during linked shooting.P.Fn-08: ^ (Dial setting changes)When <8> is pressed and the screendisplays the settings as shown on the left, youcan set whether or not the following functionscan be directly set by simply turning <9>.0: OFF (Disabled)This is the normal operation procedure.1: ON (Enabled)You can directly specify the settings by simply selecting the “Flashexposure compensation amount”, “Manual flash output”, “Firing groupcontrol”, “Flash ratio”, “Flash mode for each firing group in group flash”,and “Receiver firing group” symbols using the <S> cross keys, andturning <9>.If you fire multiple Speedlites at the same time during linked shooting, theappropriate exposure may not be obtained or uneven exposure may result.