35Returning to a Pre-marked PositionIf you wish to return to a particularscene later, mark the point with the zeroset memory and the tape will stop atthat point when you rewind/fast forwardthe tape. This function is operated withthe wireless controller.1 While recording or duringplayback, pressat the point you wish to return tolater.• The time code changes to“0:00:00 ”.• Press again tocancel the memory.2 If you marked the zero memorywhile recording, set thecamcorder to mode. Ifyou marked the zero memoryduring playback, press .3 Press to locate the zero mark.• If the tape counter shows anegative number, pressinstead.• appears and the camcorderrewinds/fast forwards the tape.• The tape stops at or near the zeromark, disappears and thecorrect time code will be displayedagain.NOTESIf there are blank sections betweenrecordings, the zero set memory may notwork correctly.Locating the Beginning of a RecordingDateYou can locate the change of the date/time zone with the date search function.Press or on the wirelesscontroller.• Press more than once to search forfurther date changes (up to 10 times).• To cancel the search press .NOTES• The date search function will not detectrecordings shorter than 1 minute perdate/time zone.• Date search may not function if the datacode is not displayed correctly.( 21)ZERO SET MEMORYZERO SET MEMORYSTOP( 21)STOP