Canon 2486B001 Instruction Manual

Also see for 2486B001: Specifications

Contents

Additional Information60[MARKERS]: You can display a grid or a horizontal line at the center of the screen. Use themarkers as a reference to make sure your subject is framed correctly (vertically and/orhorizontally).• Using the markers will not affect the recordings on the tape.[DISPLAYS]: You can hide the on-screen displays to show only the playback picture on thefull screen.• Tape operation displays appear for 2 seconds.• Warning messages and the data code (if activated) will appear, even when set to[ OFF].• All on-screen displays will appear while the playback image is magnified or a digitaleffect is activated.[6SEC.DATE]: When you start playing back a tape or when the date of the recordingchanges, the date and time will be displayed for 6 seconds.[DEMO MODE]: The demonstration mode displays the camcorder’s main features. It startsautomatically when the camcorder is powered with the power adapter if you leave it turnedon without loading a recording media for more than 5 minutes.• To cancel the demo mode once it started, press any button, turn off the camcorder orinsert a videocassette.System Setup (Beep, Power Save, etc.)SYSTEM SETUP[WL. REMOTE]: Allows the camcorder to be operated with the wireless controller.[BEEP]: A beep will accompany some operations like turning on the camcorder, the self-timer countdown, etc. It also serves as a warning beep under unusual conditions.[POWER SAVE]: In order to save power when the camcorder is powered by a batterypack, it will automatically shut off if left without any operation for 5 minutes. Approximately30 seconds before the camcorder shuts off, the message “ AUTO POWER OFF” willappear.Menu item Setting options CAMERA PLAY[WL.REMOTE] [ ON], [ OFF ] z z –[BEEP] [ HIGH VOLUME],[ LOW VOLUME], [ OFF]z z –[POWER SAVE] [ ON], [ OFF] z – –