Canon 2486B001 Instruction Manual

Also see for 2486B001: Specifications

Contents

External Connections524 When the scene you wish torecord appears, push the joystick( ) toward / to beginrecording.Recording starts.5 While recording, push the joystick( ) toward / to record pause.In record pause mode, push thejoystick ( ) toward / again toresume recording.6 Push the joystick ( ) toward tostop recording.7 Connected device: Stop theplayback.IMPORTANT• Blank sections may be recorded asanomalous picture.• If the picture does not appear,disconnect the DV cable and restore theconnection after a short while or turn thecamcorder off and then on again.• You can only record video signals in DVstandard (standard definition, SP or LPmode) from devices carrying thelogo. Note that signals from identicallyshaped DV (IEEE1394) terminals may bein different video standards.NOTESWe recommend powering the camcorderusing the compact power adapter.Copyright SignalCertain software tapes are copyrightprotected. If you attempt to play backsuch tape, “COPYRIGHT PROTECTEDPLAYBACK IS RESTRICTED” appears andyou will not be able to view the contents ofthe tape. If you attempt to record fromsuch tape via the DV terminal,“COPYRIGHT PROTECTED DUBBINGRESTRICTED” appears and you will notbe able to record the contents of the tape.