Video 93- When you connect the MIC terminal to the audio outputs on theexternal player and cannot adjust the strength of the signal, thecamcorder will automatically decrease the volume of the externalplayer when the audio signal is too loud.Onscreen Displays and Data CodeYou can turn most onscreen displays on or off.Repeatedly press h to turn the onscreen displays on/off in thefollowing sequence:, mode:• All displays on• Most displays off** Pressing h will turn off most of the icons and displays that appear automati-cally but will not remove onscreen displays that were turned on manually (forexample, onscreen markers or the audio level meter).** Touch the screen to display the playback controls.Operating modes:mode**:• All displays on• Only data code on• All displays offmode**:• All displays on• Only recording dateand time on• All displays offAbout the Data CodeWith every scene or photo recorded, the camcorder keeps a data code(date/time of recording, information about the camera setup, etc.). Inmode, this information is displayed within the Exif informationpanel while the playback controls are displayed on the screen; inmode, you can select the information to be displayed with the y8 [Data Code] setting.
