139You can cut out a portion of a recorded image and save it as a new image file.Choose [Trimming].● Press the n button to choose[Trimming] in the 1 tab, then press the mbutton.Choose an image.● Press the qr buttons or turn the  dial tochoose an image, then press the m button.Adjust the trimming area.X A frame will appear around the portion ofthe image to be trimmed.X The original image will display in the upperleft and the trimmed image will display inthe lower right.● If you move the zoom lever to the left orright, you can change the frame size.● If you press the opqr buttons, you canmove the frame.● If you press the l button, you canchange the frame orientation.● In an image with detected faces, grayframes appear around the faces located inthe upper left image. The frames can beused for trimming. You can switch betweenframes by turning the  dial.● Press the m button.Save as a new image and display.● Follow Steps 4 and 5 on p. 138.TrimmingTrimming AreaTrimming Area DisplayRecorded pixels aftertrimming• Images recorded at a pixel setting of or (p. 75), or imagesresized to (p. 138) cannot be edited.• The width and height ratio of an image that can be trimmed is fixed at 4:3.• The number of recorded pixels in a trimmed image will be smaller thanbefore trimming.
