97You can manually set the shutter speed and aperture to shoot images.D stands for “Manual”.Set the mode dial to D.Make the setting.● Press the o button to choose the shutterspeed or aperture value.● Turn the  dial to set a value.X The set exposure level appears on theindicator. You can check the differenceagainst the standard exposure level.X When the difference is more than ±2 stops,the set exposure level appears in orange.When you press the shutter button halfway,“-2” or “+2” appears in orange.Setting the Shutter Speed and Aperture ValueShutter SpeedAperture ValueStandardExposure LevelExposure LevelIndicatorExposure Level• The standard exposure is calculated according to the metering methodchosen (p. 92).• If you use the zoom after making settings or changing the composition,the exposure level may change.• Depending on the shutter speed or aperture value set, the screenbrightness may change. If the flash is raised and the mode set to h, thescreen brightness will not change.• If you press the o button while holding down the shutter button halfway,the shutter speed or aperture value (whichever is not set in Step 2), willautomatically adjust to obtain the correct exposure (the correct exposuremay not be obtained depending on the settings).
