172Before using an Eye-Fi card, be sure to check whether Eye-Fi card use isauthorized in the country or territory of use (p. 16).When you put a prepared Eye-Fi card into the camera, you can automaticallytransfer your images wirelessly to a computer, or upload them to a webservice.Image transfer is a function of the Eye-Fi card. For details on how to setupand use the card, and concerning problems transferring images, please referto the Eye-Fi card user guide, or contact the manufacturer.If you put an Eye-Fi card into the camera, the connection status can bechecked in the shooting screen (Information Display) and playback screen(Simple Information Display).will appear on transferred images.Using an Eye-Fi CardPlease keep the following things in mind when using an Eye-Fi card.(Gray) Not connected(Flashing white) Connecting(White) Transfer standby(Animated) TransferringInterruptedError retrieving Eye-Fi card info (Turn the camera off and onagain. If this continues to appear, there may be a problem withthe card.)The power saving function does not work while transferring images (p. 52).• Even if you set [Eye-Fi trans.] to [Disable] (p. 173), the Eye-Fi card maytransmit radio waves. Be sure to remove the Eye-Fi card from the camerabefore entering areas that prevent unauthorized transmission of radio waves,such as hospitals and airplanes.• If you have trouble transferring images, check the card or computer settings.For details, refer to the user guide supplied with the card.• Depending on the connection status of the wireless network, it may take timeto transfer images, or image transfer may be interrupted.• Due to its transfer function, the Eye-Fi card may become hot.• Battery consumption will be quicker than in normal use.• Camera operations will be slower than in normal use. This may be resolvedby setting [Eye-Fi trans.] to [Disable].
