Canon BJC-55 Service Bulletin

Also see for BJC-55 Series: Service manual User manual Start here User manual Specification

d) Switching on the powerMake sure the lock switch is not locked and then press thePOWER button to switchon the power. When the printer is powered up, it carries out the initial operation,then moves the carriage to the cartridge replacing position (center of the printer).ThePOWER indicator blinks to show that the printer is on standby with a BJcartridge installed. Switch on the power for the equipment in this order: computer,other peripheral equipment, printer.e) Installing the BJ cartridgeTwo types of cartridges can be installed in the printer: black BJ cartridge (BC-10)and color BJ cartridge (BC-11e). The BJ cartridge BC-11 may be used however itcannot print small dots.1) Removing the cap from the print head of the BJ cartridgeRemove the BJ cartridge from the cartridge pack, then remove the orange head capand tape protecting the nozzles as shown in the figure below.Do not reuse a head cap and tape that have been removed once. If theyare reused, the head may be clogged with foreign matter, or colors of inkmay be mixed.Peel off the tape protecting the nozzles without touching the print head.Poor printing may be caused by scratches on the printhead or any foreignobject adhered to it.After removing the cap and the tape, do not shake the BJ cartridge. Inkcould splatter out if you do.3-5BJC-50Part 3: Operating InstructionsCartridge PackBlack BJ CartridgeColor BJ CartridgeCartridge PackOrange Head CapTapeFigure 3-6 Removing the Head Cap and the Tape