| 
5-3. DIRECT PRINTING FUNCTION OF THE IMAGE FROM DIGITAL CAMERAS(BJ M40 only)The new adoption of IrTranP has enabled the printing of data sent directly fromdigital cameras compliant to IrTranP standards, not through the host computer, butvia IrDA communication.SpecificationsData communication form: IrTranP standards compatibleInput image size: 640 x 460 pixelsInput image capacity: 128 Kbyte or lessOutput image size: Landscape: 90 x 68 mmPortrait: 77 x 103 mmSeal printing: 19 x 26 mm x 16 imagesPaper size: PostcardOperationIf the printer is powered on and receives print data from digital camera, the printingoperation will start.The image data is also maintained in memory after printing, and will not be abandoneduntil new image data is received from the digital camera, or print data is input from thehost computer. Reprinting of data is possible by pressing theRESUME button (andreleasing before the beeper sounds).During the printing of image data, printing is cancelled by pressing theRESUME buttonuntil the beeper sounds once, then releasing. In this case paper is delivered. Theremaining data halfway through printing is abandoned. (As the image data has beenmaintained, it is possible to reprint the data, without resending the data from the digitalcamera.)To select the printing position, press thePOWER button andCartridge Replacementbutton simultaneously when the power is on, and release the buttons after the beepersounds the number of times applicable to the printing position to be selected. This settingreturns to the default (Landscape) by powering off. The number of beeps is as follows:Once: PortraitTwice: 16-image seal printing3 times: Photo glossy card landscape4 times: Photo glossy card portrait5 times: Setting completed.10 |
