Canon BJC 6000 - Color Inkjet Printer Service Manual

3.4 Function SettingsAs this printer has no physical function selectors, function settings can be set by usingthe Canon printer driver.3.4.1 Function settings using the printer driverThe printer driver's utility menu allows such operations and function settings as listedbelow. In the menu, you can also invoke a special custom menu by, while pressingthe shift key, selecting Custom Settings.1) Cleaning2) Head refreshing3) Nozzle check pattern printing4) Head position adjustment5) Printer power off6) Automatic power supply setting7) Launching the status monitor8) Custom settings· Enable ECP mode (disabled by default)· Enable high speed printing (enabled by default): Printer's response time (ACKNLG)is changed from 4 to 0.9 ms.· Enable pause-between-pages (disabled by default): See Page 4-16.· Enable pause-between-scanning (disabled by default): See Page 4-16.· Enable automatic head position adjustment following BJ cartridge replacement(disabled by default)· Enable manual head position adjustment (disabled by default)· Economic cleaning (disabled by default): Cleaning operation at power up is omittedif the printer has been switched off for less than 72 hours. Enabling this functionis useful for saving ink, especially when the printer's power is provided through thecomputer (possibility of nozzle clogging increases).· Smear control (enabled by default): When the smear control (see Page 4-16) isenabled, ink smearing of ink on paper due to paper-to-paper contact is prevented.Smear control is especially useful for high duty printing on normal plain paper orpost cards. When smear control is disabled (and printed sheets are collecteddirectly following printing), throughput increases.3-15BJC-6000Part 3: Operating InstructionsSpecial custom menuFigure 3-14 Printer Driver Utility (Sample)