28Viewing Still ImagesTo use the still images functions, you will need to set [STILL IMAGES] to [ON] beforehand( 9). : You can view still images already recorded on a disc (with anothercamcorder). However, playback cannot be guaranteed for all still images.To change the operating mode, refer toAbout the Operating Modes ( 9).Use the multi selector ( ) to movebetween images. Some still images may not be displayed correctly. Avoid the following actions while the DISC access indicator is on or flashing.Failing to do so may result in permanent data loss.- Do not subject the camcorder to vibrations or strong impacts.- Do not open the disc cover and do not remove the disc.- Do not disconnect the power source or turn off the camcorder.- Do not change the operating mode.Slideshow1. Press .2. Select ( ) [ SLIDESHOW] and press ( ) .3. Select ( ) [START] and press ( ) .• Images are played back one after another.• Press to stop the slideshow.Index Screen1. Move the zoom lever toward W.The stills index screen appears with the first six still images.2. Select ( , ) an image.• Move the cursor to the image you want to view.• Press or to move to the next or previous index page.3. Move the zoom lever toward T.The index screen closes and the selected image is displayed.( 35) SLIDESHOWMulti selectorFUNC.FUNC.+ –Downloaded From VideoCamera-Manual.com Manuals
