Canon DC100 Instruction Manual

Also see for DC100 - WL Remote Control: Instruction manual Instruction manual Specifications Instruction manual

Contents

Canon DC100 Instruction Manual Manual pdf 34 page image

34[ ON], [ OFF]The demonstration mode displays the camcorder’s main features. It starts automaticallywhen the camcorder is powered with the power adapter if you leave it turned on withoutloading a disc for more than 5 minutes. To cancel the demo mode once it started, press any button, turn off the camcorder orload a disc.System Setup (Volume, Beep, etc.)SYSTEM SETUP[ ON], [ OFF][ HIGH VOLUME], [ LOW VOLUME], [ OFF]A beep will accompany some operations like turning on the camcorder, the self-timercountdown, etc. It also serves as a warning beep under unusual conditions.You can check the current version of the camcorder’s firmware.[ ON], [ OFF]In order to save power when the camcorder is powered by a battery pack, it willautomatically shut off if left without any operation for five minutes. Approximately 30seconds before the camcorder shuts off, the message “ AUTO POWER OFF” willappear.[ RESET], [ CONTINUOUS]Select the image numbering method to be used on a new disc.Images are automatically assigned consecutive image numbers from 0101 to 9900, andstored in folders containing up to 100 images. Folders are numbered from 101 to 998.[RESET]: Image numbering will start anew from 101-0101 every time you insert a newdisc. If it already contains image files, a new image will be given the number following thatof the last image on the disc.[CONTINUOUS]: Image numbering will start from the number following that of the lastimage recorded with the camcorder. If the disc already contains an image with a largerimage number, a new image will be given the number following that of the last image onthe disc. This numbering method is useful for organizing images on a computer. Werecommend using this setting.DEMO MODESTILL IMAGES ( 9)VOLUME ( 27)BEEPFIRMWAREPOWER SAVEFILE NOS.Downloaded From VideoCamera-Manual.com Manuals