Getting StartedPreparations233 Adjust the viewfinder.Keep the LCD panel closed to use theviewfinder and adjust the dioptricadjustment lever as necessary.4 Fasten the grip belt.Adjust the grip belt so that you canreach the zoom lever with your indexfinger, and the start/stop button withyour thumb.The Wireless ControllerInserting the Battery(Lithium Button Battery CR2025)1 Press the tab in the direction of thearrow and pull out the batteryholder.2 Place the lithium button battery withthe + side facing up.3 Insert the battery holder.Using the Wireless ControllerPoint the controller at the camcorder’sremote sensor when you press thebuttons.NOTESThe wireless controller may not work properlywhen the remote sensor is situated understrong light sources or direct sunlight.If the wireless controller does not work, checkthat [WL.REMOTE] is not set to [OFF ]( 43). Otherwise, replace the battery.Adjusting the LCD ScreenRotating the LCD PanelOpen the LCD panel 90 degrees.You can rotate the panel 90 degreesdownward.You can rotate the panel 180 degreestoward the lens (allowing the subject tomonitor the LCD screen while you use theviewfinder). Rotating the panel 180degrees is also useful if you wish toinclude yourself when recording with theself timer.Tab180°90°
