Playback32NOTESWhen you wake up the camcorder from QuickStart mode, the following settings will bechanged automatically.- Manual focus returns to automatic focus (AF).- Manual exposure adjustment returns toautomatic exposure.- Zoom position returns to full wide angle W.In Quick-Start ready mode, the camcorderconsumes only half the power used whilerecording. Using this mode you can saveenergy when using a battery pack.While the camcorder is in Quick-Start readymode (QUICK START button lit up):- If you change the position of the /switch, the camcorder will shut off. To restorethe power, turn the camcorder off and then onagain.- The camcorder will shut off if left in the Quick-Start ready mode for 30 minutes, regardless ofthe [POWER SAVE] setting ( 43). To restorethe power, turn the camcorder off and then onagain.- If you open the cassette compartment cover,the camcorder will return to record pause mode.PlaybackPlaying Back MoviesPlay back the tape on the LCD display orclose the LCD panel to use theviewfinder. You can also turn the LCDpanel and close it with the screen facingout.1 Holding the lock button presseddown, set the switch toPLAY.2 Move the / switch to(tape).3 If the joystick guide does notappear on screen, press ( ) todisplay it.4 Locate the point where you want tobegin the playback.Push the joystick ( ) towards torewind the tape or ( ) towardsto fast forward.Playback( 10)
