92 Software Setup2. Practical ExamplesThis section provides examples of settings for the DR-6030C ISIS/TWAIN driver.Refer to these examples when making ISIS/TWAIN driver settings. Fordescriptions of particular setting items, see “ISIS/TWAIN Driver PropertiesDialog Box,” on p. 64.Scanning Both Sides of Pages• To scanning both sides of pagesSelect [Duplex] for the Scanning Side setting on the [Basic] tab sheet. (See“Scanning Side,” on p. 69.)• To avoid scanning blank pages, such as pages at the back of adocumentSelect [Skip blank page] for the Scanning Side setting on the [Basic] tab sheet.Duplex scanning is performed, and pages images detected as blank are notsaved. (See “Scanning Side,” on p. 69.)• If blank pages are not skipped, even when [Skip blank page] isselectedIncrease the [Content density] in the [Blank Skip Setting] dialog box. If the[Content density] is set too low for documents with a light background, theymay not be detected as blank pages, and not be skipped. (See “Scanning Side,”on p. 69.)• If documents with text are skipped as blank pagesDecrease the [Content density] in the [Blank Skip Setting] dialog box. If the[Content density] is set too high for documents with little text, they may beincorrectly detected as blank pages, and be skipped. (See “Scanning Side,” onp. 69.)
