Canon DV Network Instruction Manual

Also see for DV Messenger: Instruction manual Instruction manual

Contents

52Operating Camcorders With DV MessengerWhen you play back a tape on your camcorder, you can send recorded video andsound to your contact. You can also control the playback functions from the DVMpanel while monitoring the picture in the [Conversation] window.❍ You cannot send video or sound recorded in extended recording modes( SP/ LP). If you play back a tape recorded in extended recording modes,the picture in the [Conversation] window may be distorted.❍ If your contact fast forwards, rewinds or stops the tape during playback,Windows Messenger will continue to show the last picture. If the tape isplayed back again, the playback picture appears.❍ Depending on the camcorder, Windows Messenger may produce noisessuch as buzzing sound when you pause playback or use the playbackcontrol lever. This is not a malfunction.❍ Camcorder without NETWORK mode: If you operate the tape using thecamcorder buttons or the wireless controller, the display on the DVMpanel may not reflect the actual operation for a short time.1. •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••Set the camcorder to NETWORK mode.(Camcorder without NETWORK mode: Set the camcorder toPLAY (VCR) mode.)2. •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••To operate your camcorder:Click the [MY CAMERA] tab followed by the (VCR) tab.(Camcorder without NETWORK mode: Click the [MY CAMERA]tab.)To operate your contact‘s camcorder (when set to PLAY (VCR) mode):Click the [CONTACT] tab followed by the (VCR) tab.(If your contact has a camcorder without NETWORK mode, clickthe [CONTACT] tab. The camcorder of your contact must be setto PLAY (VCR) mode for you to control the playback functions.)Operating the Tape Playback Functions