Canon DV Network Instruction Manual

Also see for DV Messenger: Instruction manual Instruction manual

Contents

83E? There is an echo on the sound.➜ If you are using speakers, depending on the volume and microphonesensitivity, the sound from the speakers may be picked up by themicrophone, producing an echo. Change the direction or volume of themicrophone, or move the camcorder away from the speakers. Werecommend using headphones instead of speakers.? Cannot set the sound to mute.➜ Sound may still be send to your contact even if the microphone volume leveris moved completely to the left and the volume lever indicates that it is set tomute. Move the lever to the right and back to the left; no sound should besent to your contact now.? There are anomalous noises when the tape is set to playback pause orplayed back using playback control.➜ Depending on the camcorder, Windows Messenger may produce anomalousnoises such as buzzing sound when you pause playback or use playbackcontrol.? The operations [Stop Camera] or ending a conversation take time.➜ It may take time if you are connecting using a USB cable.? Can‘t operate the camcorder.➜ If you cannot operate the camcorder of your contact, your contact may notallow remote control.➜ Check if the camcorder is correctly connected to the computer.➜ Camcorder without NETWORK mode: If the Canon camcorder is set toCAMERA mode, some camcorders will enter the demonstration mode after acertain time. During demonstration, you may not be able to operate thecamcorder from the DVM panel. Operate the zoom lever on the camcorderto cancel the demonstration.