69AV/C Camera StorageSubunit-WIA DriverEDownloading Still Images/Movies to a Computer❍ Observe following precautions when the camcorder’s card access indicatoris flashing (the camcorder is reading or writing from or to the memorycard). Failure to do so may cause memory card data to become corrupted.- Do not open the memory card cover, remove the memory card or detachthe DV cable.- Do not turn off the camcorder or the computer.- Do not change the position of the POWER switch or the TAPE/CARDswitch.❍ Format the memory card with the camcorder.❍ Thumbnails may not appear with images not recorded with yourcamcorder.❍ Still images cannot be uploaded to the memory card using the Scannerand Camera Wizard.❍ Do not rotate the still images recorded on a memory card in WindowsPicture and Fax Viewer or Scanner and Camera Wizard or in WindowsExplorer. The file format of the original image will be changed, and therecording information of the still image may be lost. The still image can nolonger be displayed in the camcorder.❍ Still images/movies written to the memory card or downloaded to the harddisk are important original data files. Create a copy of the file first beforeworking on it on your computer.❍ If the following message appears, check if the memory card is correctlyinserted into the camcorder. If so, disconnect the camcorder from thecomputer and reconnect it.❍ If numerous still images/movies are contained in the memory card, it maytake a while until the Scanner and Camera Wizard opens.❍ If you select [Canon Camera Storage Device] in the explorer view, foldercontents may not be displayed correctly. In this case, right-click the mousebutton on the folder and select [Refresh].❍ If the AV/C Camera Storage Subunit-WIA Driver is installed on thecomputer and you connect your camcorder to the computer using a DVcable and set it to CARD PLAY mode, [Canon Camera Storage Device] or[Canon DV Camcorder] appears in the explorer view. If the driver is notinstalled, only the [Canon DV Camcorder] icon appears.AV/C Camera Storage Subunit-WIA Driver