150C.Fn-09 Auto bracketing sequence / Auto cancelYou can change the AEB sequence when you bracket with the shutterspeed, aperture, or ISO speed. You can also change the white balancebracketing sequence.When “Auto cancellation” is set, bracketing will be canceled after youchange the lens or turn the <4> switch to <2>.1: The first bracketed shot is the standard exposure (or exposed withthe standard white balance). This bracketing sequence can berepeated.2: Starts the bracketing sequence with the decreased level.3: Repeats the bracketing sequence starting with the decreasedlevel.C.Fn-10 AF point illumination1: The AF point does not light at all. Effective when it is bothersometo see it light up.2: Prevents the dimmed lighting of C.Fn-10-0.3: Effective when the AF point lighting is difficult to see with C.Fn-10-0.C.Fn-11 AF point selection method1: This reverses the functions of the <S> button and <O> button.2: ¡ While exposure metering is active, turn the <5> dial to select ahorizontal AF point. (If C.Fn-13-3 has been set, select aperipheral AF point.) This is also possible while you press theshutter button halfway and during continuous shooting with AIServo AF. The AF point selection stops at the extreme left,extreme right, top-most, and bottom-most AF points.¡ During autofocusing, you can press the <S> button to switchinstantly to the automatic AF point selection mode.¡ You can also select the AF point (including automatic AF pointselection) with the same operation as C.Fn-11-1.¡ If both C.Fn-11-2 and C.Fn-18-1/2 (p.153) have been set, selecta vertical AF point by pressing the <O> button and turning the<5> dial.3: This reverses the functions of the <S> button and <I> button.
