77Select the drive mode.¡Hold down the <W> and <Q>buttons and turn the <6> dial toselect the drive mode. Then let go ofthe buttons.u Single shootingp Low-speed continuous: Max. 3shots per sec.o High-speed continuous: Max. 8.5shots per sec.Selecting the Drive Mode¡ When you shoot, the images are first stored in the camera’s internalmemory and then transferred to the memory card. When the internalmemory becomes full during continuous shooting, the camera cannotcontinue to take more pictures until the images are transferred to thememory card. As the images are transferred to the memory card, you willbe able to take more pictures. Press the shutter button halfway to see themaximum burst for continuous shooting in the viewfinder’s lower right.The maximum burst is displayed even when there is no memory card inthe camera. Make sure a memory card has been installed beforeshooting.¡ If “Card Full” is displayed in the viewfinder and on the LCD panel, waituntil the access lamp turns off or stops blinking, then replace the memorycard.
