64The file numbering continues in sequence even after you replace thememory card. This prevents images from having the same file number,so image management with a personal computer is easier.This creates a new folder automatically and starts the file numberingfrom XXXX0001. Subsequent images you capture are stored in this newfolder. The file numbering method (auto reset or continuous numbering)will be the one that was set before forced reset.Continuous NumberingForced reset (M-Reset)100XXXX0001101XXXX0002Memory card 1XXXX0001Memory card 1XXXX0002Memory card 2File numbering afterchanging the folderFile numbering after replacingthe memory card¡ Even if the memory card still has space, shooting is not possible beyondfile number 9999. If this happens, follow the instructions on the LCDmonitor and hold down the <X> button and turn the <5> dial toselect [OK]. A new folder will be created and you can continue shooting.To prevent any interruption in shooting, set the file numbering method to[M-Reset] beforehand.¡ If the memory card in use has a DCIM folder, the file numbering mightcontinue from the last image saved in the folder.File namesA file name is assigned automatically to eachimage you capture. The file name consists of aunique, four-character camera code preset atthe factory and a file number assignedautomatically. The camera code cannot bechanged.(Example)5F9Z0001.jpg
