113Live View Shooting1 Check the composition.Press the <u> to check the imagecomposition in full view.2 Check the display.3 Take the picture.Press the shutter button completely.X The picture will be taken and the capturedimage is displayed on the LCD monitor.X After the image review ends, thecamera will return to Live Viewshooting automatically.To terminate shooting, press <0>while Live View image is displayed.Taking the PictureTo check the exposure simulation and depth of field, press the depth-of-field preview button.Flash photography is also possible. However, FE lock, modeling flash,and test firing are not possible. The Speedlite’s Custom Functions alsocannot be set with the Speedlite.With the 580EX II, the wireless setting cannot be changed.Under low light or bright light conditions, the Live View image might notdisplay the proper brightness. And if you press the depth-of-field previewbutton, the image might not show the brightness corresponding to theexposure setting (< > icon blinks). However, the captured image willreflect the exposure setting.If there is a very bright light source in the picture, such as the sun, thebright area might be covered in black on the LCD monitor. However, theactual captured image will correctly show the bright area.The time it takes to actually take the picture after you press the shutterbutton completely is slightly longer than with shooting through theviewfinder.When you press the shutter button completely, the shutter will make twoshutter-release sounds (with flash, the reflex mirror and shutter operationmake multiple sounds). However, only one shot is taken.
