871 Press the <o> button. (9)2 Select the drive mode.While looking at the top LCD panel,turn the <5> dial.u : Single shootingWhen you press the shutter buttoncompletely, one shot will be taken.o: High-speed continuousshooting (Max. 5 shots per sec.)p: Low-speed continuousshooting (Max. 3 shots per sec.)In the o and p modes, thecamera will shoot continuouslywhile you hold down the shutterbutton completely.k : Self-timer (10-sec. delay)l : Self-timer (2-sec. delay)See the next page for the self-timer operation procedure.6 : Silent single shootingThe shooting sound for singleshooting is quieter than <u>.R: Selecting the Drive ModeWhen the internal buffer memory becomes full during continuousshooting, “buSY” will be displayed on the top LCD panel and in theviewfinder and shooting will be disabled temporarily. As thecaptured images are recorded to the memory card, you will be ableto shoot more images. Press the shutter button halfway to check inthe viewfinder’s right for the current maximum burst. This is themaximum number of shots that can be taken continuously.If “Card * Full” is displayed in the viewfinder and on the top LCD panel, makesure to wait until the access lamp stops blinking, then replace the memory card.MaximumburstIf the battery level drops to about 10% (p.29), the drive mode icon (o,p,u) will blink.
