713 White Balance CorrectionWith just one shot, three images having a different color tone can berecorded simultaneously. Based on the color temperature of the currentwhite balance setting, the image will be bracketed with a blue/amberbias or magenta/green bias. This is called white balance bracketing(WB-BKT). White balance bracketing is possible up to ±3 levels insingle-level increments.Set the white balance bracketingamount.In step 2 for white balance correction,when you turn the <5> dial, the “ ”mark on the screen will change to “ ”(3 points). Turning the dial to the rightsets the B/A bracketing, and turning it tothe left sets the M/G bracketing.X On the right side of the screen, “BKT”indicates the bracketing direction andthe bracketing amount is also displayed.Press <0> to exit and return to the menu.To cancel the bracketing, set “BKT” to“±0” (“ ” becomes “ ” (1 point)).Bracketing SequenceCorrect white balance, blue (B) bias, and amber (A) bias. Or, correctwhite balance, magenta (M) bias, and green (G) bias.White Balance Auto BracketingB/A bias ±3 levelsDuring WB bracketing, the maximum burst for continuous shooting will belower and the number of possible shots will also decrease to one-third thenormal number. Also, the white balance icon will blink on the rear LCD panel.You can also set white balance correction and AEB together with whitebalance bracketing. If you set AEB in combination with white balancebracketing, a total of nine images will be recorded for a single shot.Since three images are recorded for one shot, the memory card will takelonger to record the shot.“BKT” stands for Bracketing.
