wPrinting with PictBridge1387 Start printing.Select [Print], then press <0>.X The <l> button’s blue lamp willblink and the printing will start.When the printing ends, the screenwill return to step 1.To stop the printing, press <0> while[Stop] is displayed, then select [OK]and press <0>.Handling Printer ErrorsIf you resolve a printer error (no ink, no paper, etc.) and select [Continue] toresume printing but it does not resume, operate the buttons on the printer toresume printing. For details, see the printer’s instruction manual.Error MessagesIf a problem occurs during printing, an error message will appear on thecamera’s LCD monitor. Press <0> to stop printing. After resolving theproblem, resume printing. For details on how to resolve a printing problem,refer to the printer’s instruction manual.Paper ErrorCheck whether the paper is properly loaded in the printer.Ink ErrorCheck the printer’s ink level, and check the waste ink tank.Hardware ErrorCheck for any printer problems other than paper and ink problems.File ErrorThe selected image cannot be printed via PictBridge. Images taken with adifferent camera or images edited with a computer might not be printable.Depending on the image’s file size and recording quality, it may takesome time for the printing to start after you select [Print].The [Default] setting for printing effects and other options are theprinter’s own default settings as set by the printer’s manufacturer. Seethe printer’s instruction manual to find out what the [Default] settings are.
