Handy Features98Vertical images are rotated automatically so they aredisplayed vertically on the camera’s LCD monitor andpersonal computer instead of horizontally. The settingof this feature can be changed.Under the [c] tab, select [Auto rotate],then press <0>. See the descriptions ofthe settings below and select the desiredsetting. Then press <0>.[OnPD]: The vertical image is automatically rotated on boththe camera’s LCD monitor and on the personal computer.[OnD]: The vertical image is automatically rotated only on thepersonal computer.[Off]: The vertical image is not automatically rotated at all.The vertical image is not rotated during the image reviewimmediately after it is captured.The vertical image is rotated only for playback.[OnPD] is set, but the image does not rotate during playback.Auto rotate will not work with vertical images captured while [Auto rotate] wasset to [Off]. Also, if the vertical image is taken while the camera is pointed upor down, the image might not rotate for playback. In such a case, see“Rotating the Image” on page 119.Rotating an image on the camera’s LCD monitor when [OnD]had been set.Set [OnPD], then playback the image. It will be rotated.The vertical image does not rotate on the personal computer screen.The software used is not compatible with image rotation. Use the camera’sbundled software instead.3 Auto Rotate of Vertical ImagesFAQ
