893 White Balance CorrectionNWith just one shot, three images having a different color tone can berecorded simultaneously. Based on the white balance mode’s standardcolor temperature, the image will be bracketed with a blue/amber biasor magenta/green bias. This is called white balance bracketing. Whitebalance bracketing is possible up to ±3 levels in single-level increments.Set the white balance bracketingamount.In step 2 for white balance correction,when you turn the <6> dial, the “ ”mark on the screen will change to “ ”(3 points). Turning the <6> dial to theright sets the B/A bracketing, and turningit to the left sets the M/G bracketing.X On the right side of the screen, “BKT”indicates the bracketing direction and thebracketing amount is also displayed.Press <0> to exit the setting andreturn to the menu.To cancel the bracketing, set “BKT” to“±0” (“ ” to “ ” (1 point)).Bracketing SequenceCorrect white balance, blue bias, and amber bias. Or, correct whitebalance, magenta bias, and green bias.White Balance Auto BracketingB/A bias ±3 levelsIf the image-recording quality is set to RAW or RAW+73, white balancebracketing cannot be used.With white balance bracketing set, the maximum burst will be fewerduring continuous shooting. The number of possible shots will alsodecrease to about one-third the normal number.Since three images are recorded for one shot, the CF card will takelonger to record the shot.“BKT” stands for Bracketing.
