1493 Setting Noise ReductionK2 Set the desired setting.Select the desired setting, then press<0>.[Auto]For exposures of 1 sec. or longer, noise reduction is performedautomatically if noise typical of long exposures is detected. This[Auto] setting is effective in most cases.[Enable]Noise reduction is performed for all exposures of 1 sec. or longer.The [Enable] setting may reduce noise that cannot be detected withthe [Auto] setting.3 Take the picture.The image will be recorded with noisereduction applied.With [Auto] and [Enable], the noise reduction process after the picture istaken may take the same amount of time as that for the exposure. Youcannot take another picture until the noise reduction process iscompleted.Images taken at ISO 1600 or higher may look grainier with the [Enable]setting than with the [Disable] or [Auto] setting.With [Auto] and [Enable], if a long exposure is shot with the Live Viewimage displayed, “BUSY” will be displayed during the noise reductionprocess. The Live View display will not appear until the noise reduction iscompleted. (You cannot take another picture.)
