341w PrintingYou can crop the image and print only anenlarged version of the cropped portion,as if the image is recomposed.Set the cropping right before printing.If you change the print settings aftersetting the cropping, you may have to setthe cropping again before printing.1 On the print setting screen, select [Cropping].2 Set the cropping frame size, position, and aspect ratio.The image area within the cropping frame will be printed. Thecropping frame’s aspect ratio can be changed with [Paper settings].Changing the Cropping Frame SizePress the <u> or <I> button to change the cropping framesize. The smaller the cropping frame, the larger the imagemagnification will be for printing.Moving the Cropping FramePress the <W> <X> or <Y> <Z> keys to move the frame overthe image vertically or horizontally. Move the cropping frame untilit covers the desired image area.Switching the Orientations of the Cropping FramePressing the <B> button will toggle the cropping framebetween the vertical and horizontal orientations. This enables youto create a vertically oriented print from a horizontal image.Image Tilt CorrectionBy turning the <6> dial, you can adjust the image tilt angle up to±10 degrees in 0.5-degree increments. When you adjust theimage tilt, the <O> icon on the screen will turn blue.3 Press <0> to exit the cropping.XThe print setting screen will reappear.You can check the cropped image area on the upper left of the print setting screen.Cropping the ImageTilt correction