1-81234Cover/Table ofContentsIntroductionDownloading Imagesfrom the CameraSetting the Camerasother than the EOS-1DSeries CamerasSetting the EOS-1DSeries CamerasTroubleshootingIndexRemote ShootingDownloading JPEG Images Using the PTP FunctionDownloading method for the EOS 5D, EOS 30D, EOS 20D, EOS 10D, EOS DIGITALREBEL XT/350D DIGITAL and EOS DIGITAL REBEL/300D DIGITALWhen using Windows XP, you can use the PTP (Picture Transfer Protocol) function. When youset the camera’s [Communication] and use the PTP function, you can download to yourcomputer JPEG images saved in your camera’s memory card without having to use EOS Utility.O This function is compatible with the EOS 5D, EOS 30D, EOS 20D, EOS 10D, EOSDIGITAL REBEL XT/350D DIGITAL and EOS DIGITAL REBEL/300D DIGITAL.1 Check that the camera and the computer are not connected andthen set the camera’s power switch to .2 Set the camera’s [Communication].O Set the [Communication] for cameras in the same procedure as the “Setting aCamera with [Communication] Settings” (p.1-2), using the following for a reference.3 Press the < > button to switch the LCD monitor display offand then set the camera’s power switch to .4 Connect the camera to the computer and set the camera’s powerswitch to (p.1-3).¿ The window for selecting the software to use for downloading the images isdisplayed.5 Select [Microsoft Scanner and Camera Wizard] and click the [OK]button.¿ The [Scanner and Camera Wizard] dialog box appears.6 Download images as directed in the [Scanner and CameraWizard] dialog box.O With the PTP function, you cannot download RAW images.O With the EOS 10D, you must change the firmware to version 2.0.0 or later. For detailson changing, refer to the Canon’s web site.Downloading for Cameras other than the EOS-1D Series Cameras[Communication] settings for different camerasCamera model Menu SettingO EOS 5D [ Communication] [Print/PTP]O EOS 30D [ Communication] [Print/PC ]O EOS 20D [ Communication] [ PTP ]O EOS 10D [Communication] [ PTP ]O EOS DIGITAL REBEL XT/350D DIGITAL [ Communication] [Print/PTP]O EOS DIGITAL REBEL/300D DIGITAL [ Communication] [PTP ]Downloading method for the EOS-1D Mark II N, EOS-1Ds Mark II and EOS-1D Mark IIWhen using Windows XP, you can use the PTP (Picture Transfer Protocol) function byconnecting the supplied USB interface cable to the camera’s direct print terminal. By using thePTP function, you can download to your computer JPEG images saved in your camera’smemory card without having to use EOS Utility.O This function is compatible with the EOS-1D Mark II N, EOS-1Ds Mark II and EOS-1DMark II.1 Plug the dedicated cable into the computer.O Plug the cable into the USB port.O Refer to the computer User’s Manual forinformation on the terminal areas.2 Plug the dedicated cable into your camera.O Face the plug’s < > mark towards thebottom of the camera and then connectthe plug to the camera’s direct printterminal.3 Set the camera’s power switch to .¿ The window for selecting the software to use for downloading the images isdisplayed.4 Select [Microsoft Scanner and Camera Wizard] and click the [OK]button.¿ The [Scanner and Camera Wizard] dialog box appears.5 Download images as directed in the [Scanner and CameraWizard] dialog box.O If you want to use the PTP function, connect with the USB interface cable suppliedwith the camera.O With the PTP function, you cannot download RAW images.Downloading with EOS-1D Series Cameras
