Canon EOS DIGITAL REBEL XT/350D DIGITAL Instruction Manual

Also see for DIGITAL IXUS v EOS D30: Owner's manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

Canon EOS DIGITAL REBEL XT/350D DIGITAL Instruction Manual Manual pdf 9 page image

1-41234Cover/Table ofContentsIntroductionDownloading Imagesfrom the CameraSetting the Camerasother than the EOS-1DSeries CamerasSetting the EOS-1DSeries CamerasTroubleshootingIndexRemote ShootingConnection procedure for the EOS-1D Mark II N, EOS-1Ds Mark II, EOS-1D Mark II, EOS-1Ds and EOS-1DBefore downloading images to your computer or specifying the camera settings, you mustconnect the camera to your computer with the dedicated IEEE1394 interface cable suppliedwith the camera. You can connect the camera while your computer is running.O For instructions on connecting cameras other than the EOS-1D series cameras and yourcomputer, refer to the previous page.1 Plug the dedicated cable into the computer.O Plug the cable into the IEEE1394 port.O Refer to the computer User’s Manual forinformation on the terminal areas.2 Plug the dedicated cable into your camera.O For cameras supplied with the cableprotector, attach the cable protector to thecamera, and then follow the procedurebelow to connect the dedicated cable.O Make sure the < > mark on the plug isfacing the top of the camera and thenconnect the plug to the camera’s< > terminal.Connecting an EOS-1D Series Camera to Your Computer 3 Set the camera’s power switch to .¿ [EOS Utility] starts up and main window is displayed, the camera is ready tocommunicate with your computer. Proceed to “Downloading Images from YourCamera” (p.1-6) continuously.O When the camera selection window appears, select the connected camera and then[EOS Utility] will start up.O The above window shows information displayable when EOS-1D Mark II N isconnected. The displayed information varies depending on the camera modelconnected.O If the dialog box on the right appears, select [CanonEOS Utility Downloads images from EOS camera] andthen click the [OK] button to start [EOS Utility].O If [EOS Utility] does not start, double-click the [EOSUtility] icon on the desktop or click the [Start] button Xselect [All Programs] ([Programs] in Windows 2000) X[Canon Utilities] X [EOS Utility] X [EOS Utility].