Canon FAX-L170 Starter Manual

Also see for FAX-L150: Starter Guide Driver installation guide Starter Guide Starter Guide

Contents

3Power SupplyWARNING▪ Do not damage or modify the power cord. Also, do not place heavy objects on the power cord or pull on orexcessively bend it. This can cause electrical damage, resulting in fire or electrical shock.▪ Keep the power cord away from all heat sources. Failure to do so can cause the power cord insulation tomelt, resulting in a fire or electrical shock.▪ The power cord should not be taut, as this may lead to a loose connection and cause overheating, whichcould result in a fire.▪ The power cord may become damaged if it is stepped on, fixed with staples, or if heavy objects are placedon it.▪ Continued use of a damaged power cord can lead to an accident, such as a fire or electrical shock.▪ Do not plug or unplug the power plug with wet hands, as this can result in electrical shock.▪ Do not plug the power cord into a multiplug power strip, as this can result in a fire or electrical shock.▪ Do not bundle up or tie up the power cord in a knot, as this can result in a fire or electrical shock.▪ Insert the power plug completely into the AC power outlet. Failure to do so can result in a fire or electricalshock.▪ If excessive stress is applied to the connection part of the power cord, it may damage the power cord or thewires inside the machine may disconnect. This could result in a fire. Avoid the following situations:- Connecting and disconnecting the power cord frequently.- Tripping over the power cord.- The power cord is bent near the connection part, and continuous stress is being applied to the poweroutlet or the connection part.- Applying a shock to the power connector.▪ Do not use power cords other than the one provided, as this can result in a fire or electrical shock.▪ As a general rule, do not use extension cords. Using an extension cord may result in a fire or electricalshock.▪ Remove the power plug from the AC power outlet and refrain from using the machine during a thunderstorm. Lightning can result in a fire, electrical shock or malfunction.CAUTION▪ Do not use a power supply voltage other than that listed herein, as this may result in a fire or electricalshock.▪ Always grasp the power plug when unplugging the power plug. Do not pull on the power cord, as this mayexpose the core wire of the power cord or damage the cord insulation, causing electricity to leak, resulting ina fire or electrical shock.▪ Leave sufficient space around the power plug so that it can be unplugged easily. If objects are placedaround the power plug, you may be unable to unplug it in an emergency.HandlingWARNING▪ Do not disassemble or modify the machine. There are high-temperature and high-voltage components insidethe machine which may result in a fire or electrical shock.▪ Electrical equipment can be hazardous if not used properly. Do not allow children to touch the power cord,cables, internal gears, or electrical parts.▪ If the machine makes an unusual noise or emits smoke, heat, or an unusual smell, immediately turn off thepower switches of the machine and computer and disconnect the interface cable if it is connected. Then,unplug the power plug from the AC power outlet and contact your local authorized Canon dealer. Continueduse can result in a fire or electrical shock.▪ Do not use flammable sprays near the machine. If flammable substances come into contact with electricalparts inside the machine, this may result in a fire or electrical shock.▪ Always turn off the power switches of the machine and computer, and then unplug the power plug andinterface cables before moving the machine. Failure to do so can damage the cables or cords, resulting in afire or electrical shock.▪ Confirm that the power plug or power connector is inserted completely after moving the machine. Failure todo so can result in an overheating and fire.▪ Do not drop paper clips, staples, or other metal objects inside the machine. Also, do not spill water, liquids,or other flammable substances (alcohol, benzene, paint thinner, etc.) inside the machine. If these itemscome into contact with a high-voltage area inside the machine, this may result in a fire or electrical shock.If these items are dropped or spilled inside the machine, immediately turn off the power switches of themachine and computer and disconnect the interface cable if it is connected. Then, unplug the power plugfrom the AC power outlet and contact your local authorized Canon dealer.▪ When plugging or unplugging a USB cable when the power plug is plugged into an AC power outlet, do nottouch the metal part of the connector, as this can result in electrical shock.CAUTION▪ Do not place heavy objects on the machine. The object or the machine may fall, resulting in personal injury.▪ Turn off the power switch when the machine will not be used for a long period of time, such as overnight.Turn off the machine and unplug the power plug if the machine will not be used for an extended period oftime, such as for several days.▪ Open or close covers and install or remove cassette gently and carefully. Be careful not to hurt your fingers.▪ Keep your hands and clothing away from the roller in the output area. Even if the machine is not printing, theroller may suddenly rotate and catch your hands or clothing, resulting in personal injury.▪ The output slot is hot during and immediately after printing. Do not touch the area surrounding the outputslot, as this may result in burns.▪ Printed paper may be hot immediately after being output. Be careful when removing the paper and aligningthe removed paper, especially after continuous printing. Failure to do so may result in burns.▪ Close the feeder or the platen glass cover gently so as not to catch your hand. This may result in personalinjury.▪ The laser beam can be harmful to the human body. The laser beam is confined in the laser scanner unitby a cover, so there is no danger of the laser beam escaping during normal machine operation. Read thefollowing remarks and instructions for safety.- Never open covers other than those indicated in this manual.- Do not remove the caution label attached to the cover of the laser scanner unit.- If the laser beam should escape and enter your eyes, exposure may cause damage to your eyes.▪ This machine is confi rmed as the class 1 laser product in IEC60825-1:2007.Laser Diode Information- wavelength: 780-800 nm- maximum power: 10 mWEnglishDownloaded from ManualsPrinter.com Manuals