53FaxSend a FaxEntering a Fax Number with the Alphanumeric Keys1 Place your documents (→p.19).IMPORTANTIMPORTANT If the document guides are too loose or too tight, this may result inmisfeeds or paper jams.2 Switch to the Fax mode (→p.16).3 Enter the recipient’s fax number with the alphanumeric keys.Specify destination.01/01/2012 12:52AM012XXXXXXRX Mode: AutoResolution: 200 x 1...4 Press [ ] (Start).When loading documentsinto the feederScanning documents starts. The fax is sent afterthe scanning is finished.When placing documentson the platen glass1. Press [▲] or [▼] to highlight the size of theoriginal document, and then press [OK].2. After placing next page, press [ ] (Start).• Press [ ] (Start) for each page.3. When all pages are scanned completely, press[▲] or [▼] to highlight <Start Sending>, andthen press [OK].If the recipient’s line is busy or an error occurs, the machine automaticallyredials the last destination. The default number of reattempts is two, and theinterval between each attempt is two minutes.To change the default settings, press [ ] (Menu) <Fax TX Settings> <TX Function Settings> <Auto Redial>, and then change the settingto <On>.Canceling Fax JobsPress [ ] (Stop) twice.
